-
11BUTTON; BALL, gear shift lever
-
21LEVER; gear shift (see note A)
-
1SCREW Hex, 7/16'' - 20 x 1 3/4''; cap, hex-hd., 7/16-20NF x 1-3/4''
-
1LOCK WASHER 7/16''; WASHER, LOCK, 7/16''
-
31STOP; gear shift lever spring, upper
-
1COTTER PIN 3/16'' x 1 1/4''; Pin, Split (Cotter), 3/16'' x 1 1/4''
-
41SPRING; gear shift lever
-
51STOP; gear shift lever spring, lower
-
61SHIELD; gear shift swivel housing (will work for 55938D) (optional with 42496DXA)
-
72PLUG; gear shifter swivel shaft hole
-
2NUT 3/8''-24, G5; (super ''MD'' and ''MDV'') (see note A) 3/8''-24, G5
-
1COTTER PIN 1/8'' x 1 1/4''; Pin, Split (Cotter), 1/8'' x 1 1/4''
-
2BOLT Hex, 7/16'' - 14 x 1 3/4'', Gr 5; SCREW, cap, hex-hd., 7/16-14NC x 1-3/4''
-
2BOLT Hex, 7/16'' - 14 x 2 1/4'', Gr 5; SCREW, cap, hex-hd., 7/16-14NC x 2-1/4''
-
8BOLT Hex, 7/16'' - 14 x 3'', Gr 5; SCREW, cap, hex-hd., 7/16-14NC x 3'' (super ''M'' and ''MV'')@@NOTE A - For tractors F-501 to F-28174 and L-500001 to L-504801. NOTE B - For tractors F-28175 to F-52627 and L-504802 to L-512541.
-
1BOLT Hex, 7/16'' - 14 x 3 1/4'', Gr 5; SCREW, cap, hex-hd., 7/16-14NC x 3-1/4'' (used with rear light support, 353642R11) (see ndote A)
-
1BOLT Hex, 7/16'' - 14 x 4'', Gr 5; (Used with rear light support, 9231DA) (See note A) Hex, 7/16''-14 x 4'', G5
-
2LOCK WASHER 3/8''; WASHER, LOCK, (Super ''MD'' and ''MDV'') (See note A) 3/8''
-
15LOCK WASHER 7/16''; WASHER, LOCK, 7/16''
-
91GASKET; rear frame cover (will work for 49056DA)
-
101FORK; AND RAIL, fourth and fifth speed shifter (standard)
-
111FORK; AND RAIL, second and third speed shifter (standard)
-
131GUIDE; gear shifter rail, rear
-
2BOLT Hex, 3/8'' - 16 x 3/4'', Gr 5;
-
161SHAFT; gear shift lever swivel, large
-
171AXLE PIN 11.11mm OD x 57.15mm L; SHAFT, gear shift lever swivel, small
-
181BOLT Hex, 3/8'' - 16 x 3/4'', Gr 5; (Used with pneumatic tires to plug 5th speed lockout screw hole) Hex, 3/8''-16 x 3/4'', G5, Full Thd
-
1LOCK WASHER 3/8''; WASHER, LOCK, (Used with pneumatic tires to plug 5th speed lockout screw hole) 3/8''
-
191COVER; pulley drive opening (sheet steel) (optional with 365128R1)
-
2PIN; SCREW, cap, hex-hd., 1/2-13NC x 1-1/8''
-
4BOLT Hex, 1/2'' - 13 x 2-1/4'', Gr 5; SCREW, cap, hex-hd., 1/2-13NC x 2-1/4''
-
6LOCK WASHER 1/2''; WASHER, LOCK, 1/2''
-
2BOLT Hex, 1/2'' - 13 x 1 3/8'', Gr 5, Full Thd; SCREW, cap, hex-hd., 1/2-13NC x 1-3/8''
-
4BOLT Hex, 1/2'' - 13 x 2-1/2'', Gr 5; SCREW, cap, hex-hd., 1/2-13NC x 2-1/2''
-
6LOCK WASHER 1/2''; WASHER, LOCK, 1/2''
-
211PAWL; brake pedal (will work for 49208D)
-
221SHAFT; brake pedal pawl
-
231GUIDE; gear shifter rail, front
-
2BOLT Hex, 3/8'' - 16 x 3/4'', Gr 5;
-
2BOLT Hex, 3/8'' - 16 x 3/4'', Gr 5;
-
254SPRING; gear shifter poppet
-
264BALL; POPPET, gear shifter (optional with D2616)
-
264BALL; POPPET, gear shifter (optional with 13722D)
-
321BEARING, BALL; transmission main shaft, rear (IH C-355)
-
331RING; snap, transmission main shaft bearing
-
3BOLT Hex, 1/2'' - 13 x 1 1/2'', Gr 5;
-
3LOCK WASHER 1/2''; WASHER, LOCK, 1/2''
-
381SNAP RING; RING, snap, transmission main shaft bearing
-
391GASKET; transmission driving shaft bearing cage
-
411WOODRUFF KEY #127, 1/4'' x 2 1/8'', HT; KEY, Woodruff, 127, 1/4 x 2-1/8'' (transmission driving shaft)
-
421BEARING, BALL 45mm ID x 100mm OD x 25mm W; transmission driving shaft, rear (IH L-345)
-
6BOLT Hex, 3/8'' - 16 x 1 1/4'', Gr 5; cap, hex-hd., 3/8-16NC x 1-1/4''
-
6LOCK WASHER 3/8''; WASHER, LOCK, 3/8''
-
451BALL BEARING 40 mm ID x 90 mm OD x 23 mm; BEARING, ball, transmission driving shaft, front (IH-GL-340)
-
461GASKET; transmission driving shaft bearing retainer
-
471HUB; RETAINER, transmission driving shaft bearing, w/oil seal, 43359D
-
3NO LONGER SERVICED;
-
3LOCK WASHER 3/8''; WASHER, LOCK, 3/8''
-
481OIL SEAL; OIL SEAL, transmission driving shaft
-
481OIL SEAL; transmission driving shaft (optional with 43359D and 358768R91)
-
491COUPLING; transmission driving shaft
-
501WASHER; transmission driving shaft coupling retainer
-
1BOLT Hex, 1/2'' - 20 x 1'', Gr 5; SCREW, cap, hex-hd., 1/2-20NF x 1''
-
1LOCK WASHER 1/2''; WASHER, LOCK, 1/2''
-
512BUSHING 31.03mm ID x 34.62mm OD x 31.75mm L; reverse idler gear
-
541PLUG; reverse idler shaft hole
-
1BOLT Hex, 3/8'' - 16 x 2 1/2'', Gr 5;
-
1LOCK WASHER 3/8''; WASHER, LOCK, 3/8''
-
571BUSHING 22.67mm ID x 26.36mm OD x 33.27mm L; BUSHING, power take-off shaft
-
581RING; snap, transmission countershaft rear bearing
-
591BALL BEARING 55mm ID x 100mm OD x 21mm W; BEARING, ball, transmission countershaft, rear (IH C-255)
-
613WOODRUFF KEY #28, 5/16'' x 2 1/8'', HT; KEY, Woodruff, 28, 5/16'' x 2-1/8'' (transmission countershaft)
-
661SPACER; transmission countershaft bearing
-
671BEARING, BALL 35 mm ID x 72 mm OD x 17 mm; transmission countershaft, front (IH GC-235)
-
67B1WASHER 17mm ID x 41mm OD x 6mm Thk; NUT, jam, hex., 7/8-14NF (transmission countershaft) (see note B)
-
681GASKET; transmission countershaft front bearing retainer
-
3BOLT Hex, 3/8'' - 16 x 1 1/8'', Gr 5; SCREW, cap, hex-hd., 3/8-16NC x 1-1/8''
-
3LOCK WASHER 3/8''; WASHER, LOCK, 3/8''
-
691RETAINER; transmission countershaft front bearing (see note B)
-
3BOLT Hex, 3/8'' - 16 x 1'', Gr 5;
-
3LOCK WASHER 3/8''; WASHER, LOCK, 3/8''
-
701OIL SEAL; OIL SEAL, transmission countershaft (optional with 358784R91 and 358823R91) (see note A)
-
701OIL SEAL; transmission countershaft (optional with 50839D and 358823R91) (see note A)
-
701OIL SEAL; transmission countershaft (optional with 50839D and 358784R91) (see note A)
-
711NUT; transmission countershaft (see note A)
-
721BEARING ASSY 24.99mm ID x 52mm OD x 20.64mm W; pilot, transmission main shaft (Hyatt A 5205 TS) optional with 69215DA and 356624R91)
-
721BEARING; pilot, transmission main shaft (Aetna R.K.-5205-L) (optional with 43357DA and 69215DA)
-
721BEARING, ROLLER, CYL 0.9843'' ID x 2.0742'' OD x 0.8125''; BEARING, pilot, transmission main shaft (Bower MU-5205-CL) (optional with 43357DA and 356624R91)
-
731SCREW; lock, transmission main shaft pilot bearing
-
731BOLT 1/2'' - 13 x 1''; SCREW, lock, transmission main shaft pilot bearing (for tractors serviced with 355720R91)
-
741LOCK WASHER; lock, transmission main shaft pilot bearing
-
756LOCK; gear shift rail guide bolt
-
2NO LONGER SERVICED;
-
2LOCK WASHER 3/8''; WASHER, LOCK, 3/8''
-
1ATTACHMENT; low, low speed (for super ''M'' and ''MD'' tractors equipped with first and second front wheel weights and power take-off) (composed of (1) countershaft 358612R11, (1) gear 56534DA, (1) gear 356494R11, (1) gear 358689R1) , SPECIAL
Select
Ref.
Qty
2Availability
Part #
179884Description
BOLT Hex, 1/2'' - 13 x 1 3/8'', Gr 5, Full ThdImg
Select
Ref.
41Qty
1Availability
Part #
40093DDescription
WOODRUFF KEY #127, 1/4'' x 2 1/8'', HTImg
Select
Ref.
42Qty
1Availability
Part #
ST203Description
BEARING, BALL 45mm ID x 100mm OD x 25mm WImg
Select
Ref.
45Qty
1Availability
Part #
ST250Description
BALL BEARING 40 mm ID x 90 mm OD x 23 mmImg
Select
Ref.
51Qty
2Availability
Part #
48841DDescription
BUSHING 31.03mm ID x 34.62mm OD x 31.75mm LImg
Select
Ref.
57Qty
1Availability
Part #
43328DDescription
BUSHING 22.67mm ID x 26.36mm OD x 33.27mm LImg
Select
Ref.
59Qty
1Availability
Part #
ST265Description
BALL BEARING 55mm ID x 100mm OD x 21mm WImg
Select
Ref.
61Qty
3Availability
Part #
88745Description
WOODRUFF KEY #28, 5/16'' x 2 1/8'', HTImg
Select
Ref.
67Qty
1Availability
Part #
ST247Description
BEARING, BALL 35 mm ID x 72 mm OD x 17 mmImg
Select
Ref.
72Qty
1Availability
Part #
43357DADescription
BEARING ASSY 24.99mm ID x 52mm OD x 20.64mm WImg
Select
Ref.
72Qty
1Availability
Part #
69215DADescription
BEARING, ROLLER, CYL 0.9843'' ID x 2.0742'' OD x 0.8125''Img